| Technical features: |
| Weight |
kg 4500 |
| Dimensions closed machine with lifted column: |
Length 2.100 mm Width 2350 mm Height 2670 mm (without pole slide) |
| Movements hydraulic |
1. Hammer starter stroke
2. Up/down movement of the hammer trolley 3. In/out movement of the slide stroke 600 mm
4. Stroke translator 130+130 mm
5. Column inclination from +10° to -51°
6. Slide inclination (training) from + 9,5° to -9,5°
7. Down/up movement of the column stroke 500 mm 8. Left track control
9. Right track control
|
| Power Oil sets on the machine |
180 BAR |
| Hydraulic system |
to open cicuit |
| Hydraulic pump |
at gear |
| Capacity oil tank |
140 LT |
| Translation's speed of machine |
1,92 3,33 KM/H |
| Engagement in HP |
47,3 |
| Maximum highest post |
4.400 mm |
| HAMMER |
| Impact power |
950/1200 JOULE |
| Impact rate |
620÷1.500/570÷1180 |
| Weight |
350kg/450 kg |
| Oil flow rate |
60÷90 LT.-MIN./ 70÷100 LT.-MIN |
| Power oil sets on the hammer |
170 BAR |
| ENGINE YANMAR 4TNV88: |
| n° cylinder |
4 |
| Swept volume |
2.190 CM3 |
| Power at 3.000 RPM |
34,4 KW |
| Power at 2.600 RPM |
31,3 KW |
| Air cooled |
completed with starting |
| filter |
Electric and dry |
| ACCESSORIES INCLUDED WITH MACHINE |
- Chain at four hooks for lifting machine (standard)
- Column extension post 4.400 mm |
| ACCESSORIES ON REQUEST |
- Mechanical extractor
- Hydraulic core bore
- Pneumatic D.T.H. hammer
- Automatic verticality
- GPS
- System for the screwing of screw in the soul
- Steel tracks with rubber pad
|
.jpg)
.jpg)
.jpg)
