TURCHI · Self-propelled hydraulic pile drivers
Built to keep working. TURCHI 300F — the tracked self-propelled hydraulic pile driver that pays back from the first job.
150+
Piles per day
Even on compact clay
6 m
Darbo aukštis — apima 95 % ES objektų
15 min
Setup — productive from day one
1
Operator — does the work of three
The TURCHI 300F is more than a machine. It is a business solution that changes how you work. Reliable diesel engine, proportional hydraulic mast and hammer certified up to 1,500 J — every detail maximises productivity.
One operator delivers the output of three. Setup takes 15 minutes. Depth reaches 6 m. Weight from 4,400 kg allows transport on a standard trailer.
Every day it works, it earns. Every day idle, it costs. The 300F was designed with that mindset: reliability, simple operation and ROI that speaks for itself.
The machine top European installers choose for solar sites.
150+
piles/day
6 m
working height
The 300F is the go-to choice for ground-mount solar. Compatible with H, C, U and Sigma profiles. Depth up to 6 m covers 95% of European projects. At 150+ piles per day and ~350 piles per MWp, a 1 MW site finishes in under three working days.
Configure for solarKeturi intuityvūs žingsniai nuo nulio iki produktyvumo.
Move the machine to the first pile with simplified controls.
Set tilt (±9.5° side, +10°/-51° front) in seconds.
Run the hammer and watch the pile reach full depth.
Go to the next pile and repeat.
No special training required. Intuitive from day one. The wireless remote gives full control from anywhere.
Skaičiai, kurie svarbūs, paaiškinti.
Type
Diesel 3–4 cylinder, liquid cooled
Robust workhorse found in thousands of professional machines.
Displacement
1,800 — 2,190 cm³
3 or 4 cylinders depending on option.
Power
34.4 kW (46 HP) @ 3,000 rpm — 41 kW (56 HP) @ 2,500 rpm
Tuned for high productivity with moderate fuel use.
Emissions
Euro 5 / Tier 5
Meets current regulations.
Impact energy
950 J / 1,200 J / 1,500 J (selectable)
950J for normal soils, 1,200J for compact or clay, 1,500J for very hard or rocky soils.
Frequency
620–1,500 bpm (950J) — 570–1,180 bpm (1,200J) — 520–1,050 bpm (1,500J)
Adapts to load and ground; slightly lower due to heavier ram.
Hammer weight
350 kg (950J) / 450 kg (1,200J) / 450 kg (1,500J)
Mass tuned for penetration and reliability.
Circuit
Open, proportional gear pump
Proven reliability and fine control.
System pressure
180 bar
Balanced force and efficiency.
Oil flow (950J)
60–90 L/min
Adapts to workload.
Oil flow (1,200J)
70–100 L/min
Higher flow for the heavier hammer.
Tank
140 L
Cooling and runtime headroom.
Length
2,100 mm
Compact for tight access.
Width
2,350 mm
Stable stance on slopes.
Height
2,670 mm (mast raised)
Fits standard transport clearances.
Weight
4,400 kg
Standard 5 t trailer.
Working heights
4.40 m / 5.20 m / 6.00 m (with extensions)
Configurable working height; 6 m covers 95% of projects.
Side tilt
±9.5°
Accurate placement on slopes.
Front tilt
+10° / -51°
Versatile positioning.
Track speed
1.92 – 3.33 km/h
Fast moves between posts, fine control on the pile.
Piles per day
150+
Typical site figure. Best conditions exceed 200/day.
Working height
Up to 6 m
Set via mast extensions.
Setup time
15 minutes
From trailer offload to first pile.
Operators
1
Wireless remote for full ground control.
7 žingsniai sukonfigūruoti tinkamą mašiną jūsų aikštelei.
Piles per day
Operators required
Setup time
Working height
Cost per pile
Sector versatility
Apytikslis palyginimas pagal tipines aikštelės sąlygas.
0
Pristatytos mašinos
0
Šalys visame pasaulyje
0
Patirties metai
0
Polių per dieną iš klientų
"We halved install time. The 300F let us finish a 2 MW plant in just 8 days. ROI was obvious from the first site."
Marco R.
Operations Director
EPC Solare — Veneto
"100 guardrail posts a day with one operator. We used to need three and did half the work. Site close-out times dropped sharply."
Giovanni P.
Site Manager
Infrastrutture Stradali SpA — Lombardy
"Ease of use is incredible. We trained a new operator in half a day. The machine paid for itself in under six months."
Alessandro B.
Project Manager
Solar Engineering Group — Apulia
"After-sales makes the difference. Part in 24 hours, tech on site the next day. Zero downtime."
Roberto F.
Technical Director
Strade Sicure Srl — Emilia-Romagna
‹ Tempkite slinkimui ›
FAQ
Nerandate, ko ieškote? Peržiūrėkite visą DUK sąrašą. Susisiekite su mumis per arba rašykite mums el. paštu commerciale@turchi.pr.it.
TURCHI dalyvaus „Intersolar Europe 2026“ Miunchene, Hall A5 Stand 240. Pamatykite TURCHI 300F, polių transporterį ir visas konfigūracijas saulės elektrinių parkams. Rezervuokite susitikimą.
Pirkimas ar nuoma su operatoriumi? Teisingas klausimas ne kiek kainuoja diena, o kiek MW per metus įrengiate. Štai kaip apskaičiuoti lūžio tašką megavatais — be brošiūros skaičių, nes kaina MW priklauso nuo jūsų grunto ir polių.
Įprastos techninės apžiūros kaip kiekvienai transporto priemonei (alyvos, filtrai, tepalas), plius nusidėvėjimo komplektas sandėlyje. Tie, kurie daug dirba kietame grunte, per metus išleidžia apie 7 000 € eksploatacinėms dalims. Štai kas patenka į įprastą priežiūrą ir į TURCHI 300F atsarginių dalių komplektą.
EnglishWould you like to view the site in English?
