Skip to main content
Comparisons

Guardrail pile driver: truck or self-propelled

TURCHI 160 on a truck or self-propelled 260F for guardrails? Access, ground, slopes and work rate determine the right configuration.

2 min read
TURCHI pile driver installing guardrail posts along a road

For guardrail post installation, the choice is between a truck-mounted pile driver and a self-propelled tracked machine.

Access, ground, slopes and work rate show whether the TURCHI 160 or 260F is the right configuration.

Guardrail pile driver: truck or self-propelled

TURCHI offers two different configurations for road work. The 160 on a truck is the direct solution for linear work along the carriageway. The self-propelled 260F is a tracked machine for areas where the truck cannot reach or stay stable.

Configuration TURCHI 160 (truck) TURCHI 260F (self-propelled)
Mounting On a truck, three-position turntable Self-propelled tracked machine
Ideal site Linear road work, easy access Mixed ground, slopes
Sectors Road Road and solar
Strength Direct carriageway solution Mobility and versatility

TURCHI 160 on a truck

The TURCHI 160 mounts on a truck with a three-position turntable. It is the direct solution for road sites with easy access and linear work along the carriageway. The truck moves on the road while the pile driver works at the required points without additional transport vehicles.

Automatic drop and fixed pressure variants cover different operating needs.

Self-propelled tracked TURCHI 260F

The TURCHI 260F is a self-propelled tracked pile driver for sites where mobility on mixed ground or slopes is decisive. Its tracks take it where the truck cannot reach or cannot remain stable.

It works in the road sector, with guardrails and sigma posts, and in solar. One machine can therefore cover more applications when the site requires independent mobility.

Technical criteria for choosing a guardrail pile driver

The choice depends on four factors:

  • Site type: linear work along the road or work spread across an area.
  • Ground conditions: a stable road foundation or mixed ground and slopes.
  • Access: the truck reaches the site easily or a self-moving machine is needed.
  • Work rate: the driving pace required by the site schedule.

For standard road sites, the 160 on a truck is often the most efficient solution. For complex ground or mixed road and solar applications, the 260F offers more adaptability.

Install guardrail posts according to EN 1317 regulations, which set the geometry and driving requirements.

Match the configuration to your site with the 7-step configurator.

In this article

Frequently asked questions

Can't find what you're looking for? Browse the full FAQ list. Reach out via a support request or email us at commerciale@turchi.pr.it.

It depends on the site. On linear road works with easy access, the TURCHI 160 on a truck is often the most efficient. On mixed ground or slopes, the self-propelled tracked 260F offers more adaptability.

Build your pile driver

Configure the perfect machine for your worksite in 7 steps, then preview it.

Discover the TURCHI solutions for your site

  • TURCHI 300F pile driver at work in a photovoltaic field
    150 piles per day
    Machine type
    Self-propelled tracked
    Working height
    6 m
    Weight
    4,400 kg
    Impact energy
    950 / 1,200 / 1,500 J
    System pressure
    180 bar
    Front tilt
    +10° / -51°
    Side tilt
    ±10°
    Ideal for

    Solar plants of 3+ MW and large projects

  • TURCHI 260F pile driver on a road construction site
    150 piles per day
    Machine type
    Self-propelled tracked
    Working height
    3.5 m
    Weight
    3,500 kg
    Impact energy
    950 / 1,200 / 1,500 J
    System pressure
    170 bar
    Front tilt
    +10° / -51°
    Side tilt
    ±10°
    Ideal for

    Solar plants of 1-2 MW and road sites

  • TURCHI 160 pile driver installing a guardrail
    100 piles per day
    Machine type
    Truck-mounted (CA / PF)
    Working height
    2.65 m
    Weight
    1,500 / 1,800 kg
    Impact energy
    830 J
    System pressure
    170-180 bar
    Front tilt
    +10° / -15°
    Side tilt
    ±9.5° / ±10°
    Ideal for

    Guardrails and mobile sites